33 Different Types of Wrenches | Best Company for a Wrench
Friends, we went further to learn about plumbing tools. We saw the wrench in it, but we still know little about the wrench, or we only know about some wrench. In today’s chapter, we will learn about the types of wrenches.
We will get information about what a wrench is, different types of wrenches and their design, how wrenches work, etc. So let’s go over this chapter,
What Is a Wrench?
A wrench, also called a spanner, is a tool usually operated by hand to tighten and loosen bolts and nuts. They are nuts and bolts that Prevent such fasteners from turning or being damaged.
Different types of wrenches are made in different shapes and sizes. It is used to hold, fasten, tighten and loosen objects such as pipes, pipe fittings, machines, nuts, and bolts. Apart from that, it is commonly used in many other places.
How Many Types of Wrenches?
Wrenches are available in a variety of styles for different applications. Some are designed to work with standard fasteners, and some are for metric applications. Each wrench differs due to its specific functions. Using the right style of wrench is essential to make your project easier. Here are some of the more common wrench types and their uses to help you find the right wrench.
There are 33 different types of wrenches which are as follows.
- Torque Wrench
- Allen Wrench
- Impact Wrench
- Pipe Wrench
- Socket Wrench
- Adjustable Wrench
- Spanner Wrench
- Oil Filter Wrench
- Basin Wrench
- Ratchet Wrench
- Strap Wrench
- Lug Wrench
- Tiger Wrench
- Air Impact Wrench
- Box Wrench
- Chain Wrench
- Open-End Wrench
- Tap Wrench
- Spark Plug Wrench
- Crowfoot Wrench
- Flare Nut Wrench
- Tension Wrench
- Torx Wrench
- Mole Wrench
- Hammer Wrench
- T Wrench
- Pin Wrench
- Alligator Wrench
- Cone Wrench
- Curb Key
- Bionic Wrench
- Pedal Wrench
- Spud Wrench
Let’s look at detailed knowledge about different types of wrenches in plumbing.
1. Torque Wrench
A torque wrench is a type of wrench used to tighten by applying a certain torque to fasteners such as nuts, bolts, or lag screws. These types of wrench allow for proper tensioning and loading of all parts, where our reach is difficult.
2. Allen Wrench
Allen wrench is also known as Allen Key, Hex Key, or Hex Wrench. This small handheld tool is used to rotate bolts and screws with a hexagonal socket.
3. Impact Wrench
Impact Wrench is a power tool that allows very high output torque with minimal effort by the user. These types of wrenches can be very useful for successfully completing a wide range of tasks ranging from making or repairing items at home to car repairs. It is also known by various names like Impactor, Air Gun, Air Wrench, Impact Gun, Torque Gun, Windy Gun, and Rattle Gun.
4. Pipe Wrench
A pipe wrench is also often called a plumber wrench or monkey wrench. It rotates threaded pipes and pipe fittings for hardening or loosening. In North America, the most common form of pipe wrench is the Stilson wrench or Stilson-pattern wrench.
5. Socket Wrench
A socket wrench is a combination of socket and ratchet that is a type of spanner. Sockets and ratchets are among the various types of wrenches designed for specific functions. They tighten and loosen the fasteners, just like any other wrench.
However, some functions are particularly suited to the ratchet and socket. Allows you to rotate the nut or bolt without moving the tool on the fastener – as you need to do with the wrench when there is not enough space to rotate it in a full circle. It makes work easier and faster. It is also often called a socket spanner.
6. Adjustable Wrench
The adjustable wrench features a movable lower jaw that allows you to tighten and loosen a wide range of nuts and bolts. The high carbon steel construction and rugged I-beam design make these types of wrenches some of your kit’s most durable and versatile tools.
7. Spanner Wrench
A spanner wrench is used to fit round holes on the perimeter of collars, bearings, and other machine tool components. These types of wrenches can have one or more pins or hooks to tighten or loosen the drive spanner head screw, threaded collar, retainer rings, and shaft.
Whether you are a plumber working with water pipes or an employee of a gas company working on refitting gas lines, a spanner wrench is a definite tool to provide the required precision.
8. Oil Filter Wrench
The oil filter wrench is used to remove or replace the oil filter without damaging the filter. It is also called an oil filter removal tool. It is an ideal tool for cars, truck engine filters, hoses, drain plugs, etc.
9. Basin Wrench
The basin wrench is made of heavy-duty steel, making removing and installing any flow faucet easy, reaching the nuts below the sink where standard wrenches cannot reach. Its head is reversible to access tap nuts at certain locations.
10. Ratchet Wrench
A ratchet wrench is a form of ratchet mounted on a wrench. It allows the user to set two-turn directions, which requires operators to rotate the fasteners less than one degree of arc swing, making them ideal for very tight spaces. Wrenches with ratchet heads make fastening significantly faster.
Must Read : 31 Different Types of Plumbing Tools and Their Uses
11. Strap Wrench
A strap wrench is used to hold and rotate cylindrical objects (polished metal, PVC and glass pipes, fittings, filters, hose) and round or irregularly shaped objects. When the twist-on connectors, pipes, and other stuck items need the required torque and tight grip, this wrench will allow you to reach the rugged corners properly, making tight spaces and stuck-fitting repairs easier.
A strap wrench with various straps like rubber, plastic, metal, or nylon is available.
12. Lug Wrench
A lug wrench is a type of socket wrench. It loosens or tightens the lug nuts found on automobile wheels. The lug wrench can be L-shaped or X-shaped; the cross-shaped leg wrench has different-sized sockets on all four ends. It is also known as a spider wrench. In the United Kingdom and Australia, it is known as a wheel brace.
13. Tiger Wrench
The Tiger Wrench is a uniquely designed tool that combines 48 tools into one, making any repair quick and easy. Their rotating adjustments allow you to quickly and easily find the size you want at any angle.
14. Air Impact Wrench
The Air Impact Wrench is a powerful air tool used to loosen or tighten the toughest fasteners. Users can use this tool to deliver high torque with minimal effort, and it is convenient to use as it is cordless.
15. Box Wrench
A box wrench is a wrench with a socket that fits off the bolt head or nut. It is also called a ring spanner or box end wrench. This wrench is used for hexagonal or square nuts. These wrenches have edges that encircle the nut and allow the nut to be tightened or loosened.
These spanners are often double-ended and are usually accompanied by offset handles to improve access to nuts or bolts.
16. Chain Wrench
Chain wrenches have double reversible jaws that allow ratchet action in both directions without removing the wrench from the pipe. Adjustable chains provide powerful torque by tightening around an object to hold it in place so that it can rotate the object. It is used for all pipe fittings, from waterworks to plumbing.
17. Open-End Wrench
An open-end wrench is a one-piece wrench with a U-shaped opening that holds two opposite faces of a bolt or nut. These types of wrenches often have double ends, with each end having different-sized openings. It is also called an open-ended spanner.
It is used for the installation (tightening) or removal (loosening) of bolts, nuts, and other fasteners. They can access the fasteners from above.
18. Tap Wrench
A tap wrench is a hand tool used to rotate a square drive on a tap used in threading operations and for small tools such as a double-handled wrench (cutting female threads inside a nut) or a precision rimmer.
19. Spark Plug Wrench
The spark plug wrench is specifically designed for use with smaller engines. It has a tube with six-sided sockets at either end, which is rotated by a small length of rod (tommy bar or tee bar) inserted through two holes in the center of the tube.
20. Crowfoot Wrench
Crowfoot Wrench is designed to use the same drive size as a socket wrench. Ordinary wrench and socket cannot reach, there it is easily reached. They are frequently used in the plumbing or automotive industry and work well with tube lines.
Must Read : 19 Different Types of Kitchen Sinks and Their Design
21. Flare Nut Wrench
A flare nut wrench is an open-ended wrench used to hold a nut on the end of a tube. It is also called a line wrench Or tube wrench. Visually, they look like a box or ratchet wrench, but instead of completely enclosing the nut, it has a narrow enough width wide enough to allow the wrench to fit on the tube, and It has thick jaws to increase the contact area with the nut.
These types of wrenches allow maximum contact on the plumbing nuts, which are usually soft metals and are, therefore, more likely to be damaged by this.
22. Tension Wrench
Pin Tumblr locks are the most common locks used in home doors. The tension wrench is used to apply torque to the lock plug to hold any pick pin in place so that the springs are not pushed back. Then the wrench turns to open the lock. They are usually shaped like elongated L’s.
23. Torx Wrench
The Torx wrench looks like a cross-section star. Its star-shaped head makes them more secure than a regular flat-head or cross-head screw and allows higher torque transmission.
In types of wrenches, this wrench is suitable for types of powered tools used in product-line assembly. It is resistant to wrench cam-out, so it is widely used in automobiles, automated equipment, and computer components.
24. Mole Wrench
A mole wrench is also called vice-grips, a vice grip, or locking pliers. It can also be used as a clamp to remove screws, nuts, and bolts and hold things in place. It gives the user extra pulling power when they firmly grab and hold an object.
25. Hammer Wrench
A Hammer wrench, also known as a striking wrench, is specially designed to use a hammer along the block end of the handle, enabling the person to provide great force. Larger fasteners can usually be struck with a hammer to loosen them. Striking the wrench provides the extra torque needed to help it loosen properly.
26. T Wrench
T wrench, also called t handles, is used to operate a manually operated socket. It has a huge leverage handle that uses force comfortably, and the final tightening can be done with both hands.
27. Pin Wrench
A pin wrench, also called a pin spanner wrench, has a projecting pin inserted into a hole (such as a nut or cylinder) to make a grip.
28. Alligator Wrench
The shape of the Alligator wrench indicates the open mouth of the alligator. This ranch was popular among mechanics, factory workers, and farmers for maintenance, repair, and operation work in the days when fasteners were square instead of hex heads.
29. Cone Wrench
The cone wrench is also called a cone spanner, a tool used to adjust the cones of cups and cone bearings in bicycle assembly and maintenance. These types of wrenches are thinner and lighter than other open-ended wrenches used to work on bicycles.
30. Curb Key
The curb key also called the Toby key, is a type of wrench used to open and close valves on municipal water pipes. Valves usually have a rectangular lug, Which is set up deep in the ground, where the key is needed.
Must Read : 13 Different Types of Kitchen Faucets and Their Design and Work
31. Bionic Wrench
The Bionic Wrench is a wonderful patented hybrid of an adjustable wrench that is easy to use with a pair of pliers. This wrench is designed to multiply your hand’s grip force so you can tighten or loosen the bolt more easily. You can develop a ratchet-like speed by turning the bionic wrench completely.
32. Pedal Wrench
A pedal wrench is used to remove, install or adjust the pedal connection to their crank, and to open and work on the inside of the pedal. Breaking the pedal threads free from the threads of the bike crank makes this wrench the most difficult process of changing or maintaining the pedal.
33. Spud Wrench
A spud wrench is an adjustable or standard box wrench at one end and a wrench with a sharp spike at the other end. The purpose of this wrench is to loosen and tighten a portion of the piping found in older model toilets. This piece of piping was called ‘spud,’ hence the name spud wrench.
This wrench was designed to work on bolts, collars, and other pieces of the spud unit. Spud attached the toilet bowl to the reserve tank.
What Is the Best Company for a Wrench?
Wrenches are designed to tighten and loosen nuts, bolts, screws, and other threaded items. Generally, wrenches are well suited for tight areas where a lot of torque is required. There are a number of different types of wrenches, each with a specific use.
If you go to buy a wrench, here are the names of some of the best wrench companies, which will ensure that you are buying a good wrench.
The best 10 companies for wrenches are as follows.
- Milwaukee
- Craftsman
- Tekton
- J.H Williams
- Husky
- Gearwrench
- Matco
- Wright
- SK Tools
- Snap-On
Must Read : What Is a Sewer Line | Types of Sewer Pipes | Best Sewer Line Insurance Company
What Is a Crescent Wrench?
Crescent is a brand of hand tools. It originated from the Crescent Tool Company, founded in 1907. The wrench got its name from the Crescent Tool Company in the early 1900s. It has a fixed jaw that is adjusted by turning the worm screw in one jaw. A Crescent wrench is a type of adjustable wrench larger than an open-end or box-end wrench.
What Is a Torque Multiplier?
A torque multiplier is a tool used to provide mechanical gain in applying torque to bolts, nuts, or other objects designed to perform a task with relatively high torque requirements.
What Is Cordless Impact Wrench?
The cordless impact wrench delivers power without a cord or air hose hassle. The Harbor Freight Earthquake, Bauer, and Chicago Electric’s Cordless and Corded Impact Wrench have a lot of value.
What Is a Lug Nut Wrench?
Lug nut wrenches have X-shaped handles. This wrench allows two-handed leverage to break loose stubborn lug nuts compared to the low leverage generated with an L-shaped lug wrench. These wrench handles come with different-sized sockets at each end. This wrench can also be called a tire wrench or wheel spanner.
What Is L Wrench?
L wrench is named after its brand Allen. They are also called “hex keys.” It is an L-shaped wrenching with six sides. They are used to drive hexagonal-shaped recessed holes.
What Is a Filter Wrench?
A filter wrench is used to remove or replace the oil filter without damaging the filter. It is also called an oil filter wrench. It is an ideal tool for cars, truck engine filters, hoses, drain plugs, etc.
What Is an Open Wrench Used?
An open wrench is a one-piece wrench with a U-shaped opening that has two opposite faces of a bolt or nut. These wrenches often have double ends, each with different-sized openings. It is also called an open-ended spanner. It is used to install (tighten) or remove (loosen) bolts, nuts, and other fasteners. They can access the fasteners from above.
What Is a Wrench Used For?
Wrenches are made in various shapes and sizes and are used for gripping, fastening, turning, tightening, and loosening things like pipes, pipe fittings, bolts, and nuts.
If You Liked This Post? So Share It with Your Friends
Suggested Articles:
- What Is A Plumbing Pipe | 22 Different Types of Plumbing Pipes
- What Is Pipe Fitting | 12 Types of Pipe Fittings for Plumbing
- What Is a Plumbing Trap | 15 Different Types of Plumbing Traps
- What Type of Piping Is Used in Homes | Types of Pipes for Water Supply
- Types of Metal Pipes | Seamless Vs Welded Pipes